Eleaf iPower MOD

Contents
1 x iStick Power 80W TC 5000 Box Mod by Eleaf
1 x USB Cable
1 x User Manual

Features
Size: 49.5mm x 23.5mm x 83.5mm
Thread type: 510 thread
Output mode: VW/Bypass/Smart/TC(Ni,Ti,SS,TCR-M1,M2,M3) Mode
Output wattage: 1-80W
5000mAh Internal Battery
Resistance range: 0.05-1.5ohm (TC modes)
0.1-3.5ohm (VW/Bypass/Smart mode)
Temperature range: 100-315℃/200-600℉ (TC modes)
New VW Interface
Dual Circuit Protection

4.00 out of 5 based on 1 customer rating
(1 customer review)

£45.00

5 in stock

Compare
SKU: EIMOD Categories: , Tags: , , ,

Share this product

Description

The Eleaf iStick Power is a pleasure to use, featuring huge 5000mAh battery capacity and various output modes. View all your key vaping information on the clear OLED screen and change your output settings with easy to use, responsive buttons. A must have e-cigarette available in a selection of classic finishes.

Additional information

color

Bronze, Grey, Silver, Wood Grain

1 review for Eleaf iPower MOD

  1. 4 out of 5

    :

    PRODUCT:
    IPOWER 80W

    SPECIFICATIONS:
    5000 MAH
    510 ADAPTER
    MICRO USB CHARGER
    TEMPERATURE CONTROL
    BYPASS/SMART MODE

    REVIEW:
    The iPower 80w does what it says on the packaging. It is an 80w powered device that has a long sustainable battery of up to 5000mah
    which is what a lot of users search for in a device, whether it can hold the charge for a working day lifestyle? The answer to that
    is that it can especially with an output of 50 watts. As the mod can power output up to 80w it allows users to have tanks that require
    high power output with means high VG e-liquids can be used with this mod. It has several features including a bypass mode which
    allows you to run the power output from its highest point to its lowest point without having to adjust the power output. You can also
    do temperature control with Nickel, Stainless Steel and Titanium which works in celsius and fahrenheit. It has a 510 adapter
    stainless steel thread and a spring loaded pin therefore there it is compatible with RDAs and RTDAs. It can also read the resistances
    between 0.1ohms to 3.5ohms. It has easy clicking buttons and a bright OLED screen for easy visibility. It has a very simple user programming
    for easy usability. The mod also has a built-in PCB (protection circuit board) which keeps it in place with the safety regulations.
    The only con to this mod is that it is a built-in lipo battery therefore when the duration of the battery cell dies the mod itself will need replacing.

    PROS:

    CONS:

    BEST FEATURE:
    The feature that stands out the most is the smart mode allowing it to remember the wattage you like for up to 10 different resistances,
    so if you like to change your RDAs or tanks a lot this will be best suited.

    COLOURS:
    Brushed Steel
    Grey
    Brushed Wine
    Brushed Olive
    Brushed Blue
    Matt White
    Wood Grain
    Bronze

    Overall rating:
    4/5

Add a review

Pin It on Pinterest

Share This