Eleaf iPower MOD
Eleaf iPower MOD
£45.00
Contents
1 x iStick Power 80W TC 5000 Box Mod by Eleaf
1 x USB Cable
1 x User Manual
Features
Size: 49.5mm x 23.5mm x 83.5mm
Thread type: 510 thread
Output mode: VW/Bypass/Smart/TC(Ni,Ti,SS,TCR-M1,M2,M3) Mode
Output wattage: 1-80W
5000mAh Internal Battery
Resistance range: 0.05-1.5ohm (TC modes)
0.1-3.5ohm (VW/Bypass/Smart mode)
Temperature range: 100-315℃/200-600℉ (TC modes)
New VW Interface
Dual Circuit Protection
10 in stock
The Eleaf iStick Power is a pleasure to use, featuring huge 5000mAh battery capacity and various output modes. View all your key vaping information on the clear OLED screen and change your output settings with easy to use, responsive buttons. A must have e-cigarette available in a selection of classic finishes.
Additional information
Color |
---|
PRODUCT:
IPOWER 80W
SPECIFICATIONS:
5000 MAH
510 ADAPTER
MICRO USB CHARGER
TEMPERATURE CONTROL
BYPASS/SMART MODE
REVIEW:
The iPower 80w does what it says on the packaging. It is an 80w powered device that has a long sustainable battery of up to 5000mah
which is what a lot of users search for in a device, whether it can hold the charge for a working day lifestyle? The answer to that
is that it can especially with an output of 50 watts. As the mod can power output up to 80w it allows users to have tanks that require
high power output with means high VG e-liquids can be used with this mod. It has several features including a bypass mode which
allows you to run the power output from its highest point to its lowest point without having to adjust the power output. You can also
do temperature control with Nickel, Stainless Steel and Titanium which works in celsius and fahrenheit. It has a 510 adapter
stainless steel thread and a spring loaded pin therefore there it is compatible with RDAs and RTDAs. It can also read the resistances
between 0.1ohms to 3.5ohms. It has easy clicking buttons and a bright OLED screen for easy visibility. It has a very simple user programming
for easy usability. The mod also has a built-in PCB (protection circuit board) which keeps it in place with the safety regulations.
The only con to this mod is that it is a built-in lipo battery therefore when the duration of the battery cell dies the mod itself will need replacing.
PROS:
CONS:
BEST FEATURE:
The feature that stands out the most is the smart mode allowing it to remember the wattage you like for up to 10 different resistances,
so if you like to change your RDAs or tanks a lot this will be best suited.
COLOURS:
Brushed Steel
Grey
Brushed Wine
Brushed Olive
Brushed Blue
Matt White
Wood Grain
Bronze
Overall rating:
4/5